Product ID:P/N 08670 SILICONE BLACK (IPA)
MSDS Date:03/06/1992
FSC:8030
NIIN:00D020031
MSDS Number: CCJLB

MINNESOTA MINING AND MFG CO AUTOMOTIVE TRADES DIV

3M CTR
ST PAUL, MN 55144-1000
US

Emergency Phone: 612-773-1110

Info Phone: 612-733-1110

Cage: 52157

NAPA, A DIVISION OF LINCOLN AUTOMOTIVE

ST. LOUIS, MO 63120-1578 US

Telephone: 414-255-5520

Cage: 050Q3

DIMETHYLCYCLOPOLYSILOXANE

CAS: 69430-24-6

Fraction By Weight: 1-10%

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 1-10%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9596

POLYDIMETHYLSILOXANE

CAS: 70131-67-8

Fraction By Weight: 60-70%

SILICA GEL

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 10-20%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3

POLY (DIMETHYLSILOXANE)

CAS: 63148-62-9

RTECS: JJ6484500

Fraction By Weight: 1-10%

METHYLOXIMINOSILANE

CAS: 22984-54-9

Fraction By Weight: 1-10%

HYDROXYTERMINATED POLYMETHYLPHENYLSILOXANE

CAS: 80801-30-5

Fraction By Weight: 1-10%

DI(ETHYLMETHYLKETOXIME)METHOXYMETHYLSILANE

CAS: 83817-72-5

Fraction By Weight: 1-10%

ETHYLENEDIAMINE,N-(3-(TRIMETHOXYSILYL)PROPYL)-

CAS: 1760-24-3

RTECS: KV7400000

Fraction By Weight: 1-10%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE CONTACT MAY CAUSE SEVERE
EYE IRRITATION; MAY CAUSE CORNEAL INJURY. SKIN CONTACT MAY CAUSE
IRRITATION. INHALATION OF VAPORS MAY CAUSE RESPIRATORY SYSTEM
IRRITATION. INGESTION MAY CAUSE GI TR ACT IRRITATION. CHRONIC:
PROLONGED/REPEATED EXPOSURE MAY CAUSE SKIN IRRITATION/BURNS.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:EYES-IRRITATION, REDNESS, SWELLING, PAIN,
TEARING, HAZY VISION. SKIN-IRRITATION, REDNESS, SWELLING, ITCHING.
INHALED-IRRITATION, SORENESS OF THROAT/NOSE, COUGHING, SNEEZING.
INGESTED-GI TRACT IRRITATI ON, PAIN, VOMITING, ABDOMINAL
TENDERNESS, NAUSEA, BLOOD IN VOMITUS, BLOOD IN FECES.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES-IMMEDIATELY FLUSH WITH WATER FOR 10 MINUTES. CALL A
PHYSICIAN. SKIN-WASH AREA WITH SOAP & WATER. INHALED-REMOVE TO
FRESH AIR. CALL A PHYSICIAN IF SYMPTOMS PERSIST. INGESTED-DO NOT
INDUCE VOMITING ! IMMEDIATELY CALL PHYSICIAN OR POISON CONTROL
CENTER.

Flash Point Method:TCC
Flash Point:212F,100C
Extinguishing Media:WATER FOG, CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
FULL FIRE FIGHTER'S PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:NONE KNOWN.

Spill Release Procedures:VENTILATE SPILL AREA. OBSERVE PRECAUTIONS FROM
OTHER SECTIONS. COLLECT SPILLED MATERIAL. PLACE IN A CLOSED
CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED. KEEP
OUT OF REACH OF CHILDREN. USE IN A WELL-VENTILATED AREA. AVOID SKIN
CONTACT. AVOID EYE CONTACT.
Other Precautions:DO NOT INGEST. AVOID PROLONGED BREATHING OF PRODUCT.

Respiratory Protection:IF ENGINEERING CONTROLS FAIL OR NON-ROUTINE USE
OR AN EMERGENCY OCCURS; WEAR AN MSHA/NIOSH APPROVED RESPIRATOR WITH
ORGANIC VAPOR CARTRIDGE OR AN AIR-SUPPLIED RESPIRATOR OR SCBA, AS
REQUIRED. USE IAW 29 CFR 1910.134.
Ventilation:AVOID VAPORS RELEASED DURING CURING,USE ADEQUATE MECHANICAL
VENTILATION OR LOCAL EXHAUST TO MAINTAIN EXPOSURE BELOW TLV.
Protective Gloves:IMPERVIOUS-RUBBER.
Eye Protection:SAFETY GLASSES/CHEMICAL SPLASH GOGGLES.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER. DLA-HMIS:
EYE WASH STATION, WASHING FACILITIES.
Work Hygienic Practices:WASH HANDS AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health

HCC:V7
Spec Gravity:1.060
Viscosity:NON-SAG PASTE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:NON-SAG PASTE, BLACK; NEGLIGIBLE ODOR.
Percent Volatiles by Volume:0.00

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS MAY CAUSE REACTION.
Stability Condition to Avoid:CONTACT WITH MOISTURE CAUSES SLOW
POLYMERIZATION.
Hazardous Decomposition Products:SILICONE DIOXIDE, CARBON DIOXIDE &
TRACES OF INCOMPLETELY BURNED PRODUCTS WHEN SUBJECTED TO EXCESSIVE
HEAT OR FLAME.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL ENVIRONMENTAL REGULATIONS. EPA/RCRA HAZWASTE NUMBER-NONE.
INCINERATE BULK PRODUCT WITH FLAMMABLE MATERIAL IN AN INDUSTRIAL OR
COMMERCIAL FACILITY .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.